All products

SC18IS606PWJ I2C to SPI Bridge | 400kHz/1.8Mbps | TSSOP-16 Package | NXP

The SC18IS606PWJ is an I²C-bus to SPI bridge IC from NXP, serving as an interface between a standard I²C-bus of a microcontroller and an SPI bus, allowing the microcontroller to communicate directly with SPI devices through its I²C-bus . The device operates as an I²C-bus target-transmitter/target-receiver and an SPI controller, controlling all SPI bus-specific sequences, protocol, and timing . It features a built-in oscillator, supports three SPI chip select outputs (configurable as GPIO), and provides a 1024-byte data buffer. The I²C interface operates up to 400kHz, and the SPI operates up to 1.8Mbit/s . It operates from 1.71V to 3.6V with 5V tolerant I/O pins and across a temperature range of -40°C to +105°C . This device is a functional replacement for the SC18IS602B, offering lower operating voltage and a larger data buffer . We supply 100% original products with fast delivery and professional technical support.

Stock Count: 2500

Price:$TBD

MKW36A512VHT4 Wireless MCU | BLE 5.0 | 48MHz | 512KB Flash | 64-VFLGA Package | NXP Automotive Grade

The MKW36A512VHT4 is an ultra-low-power, highly integrated single-chip wireless MCU from NXP’s Kinetis W series, featuring a Bluetooth® 5.0 and generic FSK radio transceiver. It is built around a 48MHz ARM Cortex-M0+ core with 512KB of Flash (with ECC) and 64KB of SRAM, supporting up to 8 concurrent BLE connections. Housed in a 64-VFLGA package (7x7mm), it operates from 1.71V to 3.6V, with receive current of 6.3mA and transmit current of 5.7mA (at 0dBm), maximum output power of +5dBm, and sensitivity of -95dBm (1Mbps). The device covers a wide temperature range of -40°C to +105°C and is AEC-Q100 automotive qualified. It is ideally suited for automotive electronics (e.g., tire pressure monitoring, passive entry), industrial control, medical devices, and embedded systems requiring low-power wireless connectivity. We supply 100% original, new products with ample stock, fast delivery, and professional technical support.

Stock Count: 19000

Price:$TBD

PRTR5V0U2X,215 Ultra-Low Capacitance ESD Protection Diode | 1pF | SOT-143B Package | Nexperia

The PRTR5V0U2X,215 is an ultra-low capacitance, dual rail-to-rail ESD protection diode from Nexperia, designed to protect two high-speed data lines or high-frequency signal lines from damage caused by ESD and other transients. With a typical I/O-to-ground capacitance of just 1pF, it introduces minimal signal attenuation or distortion for high-speed interfaces like USB 2.0 and HDMI. The device integrates two pairs of ultra-low capacitance rail-to-rail diodes and an additional ESD protection diode to ensure signal line protection even when no supply voltage is available. Housed in a compact SOT-143B surface-mount package, it complies with IEC 61000-4-2 and provides ESD protection up to 8kV contact discharge. We supply 100% original, new products with ample stock and fast delivery.

Stock Count: 36800

Price:$TBD